JD BUG PRODUCT GUARANTEE

TM

J & R Sports Limited guarantee to replace, free of charge, within 30 days of purchase any part or parts that in our opinion are proved to be defective through faulty materials or workmanship.

THIS GUARANTEE IS SUBJECT TO THE FOLLOWING CONDITIONS.

1. This guarantee is only offered to the original purchaser of the product.

2. Any product found to be defective through either faulty materials or manufacture will be repaired, or at J & R Sports option, replaced free of charge excluding shipment costs.

3. This guarantee does not cover the plastic multi mount clip which may break if the Bug is dropped by the user.

4. The guarantee does not cover user abuse of the product, user inability to ride the product causing defects or aggressive / stunt use.

5. This guarantee does not cover parts subject to wear and tear, accident, unauthorised alteration and non standard parts, unauthorised repair and hiring out. For details of parts not covered by this guarantee please refer to item 7.

6. Your guarantee is valid in the United Kingdom only.

7. Parts such as wheels, brakes, bearings and grips are all subject to wear and if these parts require replacing due to use then they can be purchased from your retailer or directly from J & R Sports.

2nd GENERATION FOLDING SCOOTER

INSTRUCTIONS, GUARANTEE & INFORMATION

Thank you for purchasing the JD BugTM Folding Scooter. With care and attention to the information contained within this leaflet your product will last. If you experience any problems with your Bug please contact your retailer or our help line on 0151 523 0500 our staff will be pleased to assist you.

Conforms To:

prEN 13613

EN71 - 1: 1998 - 8.22

STR ENTRAPMENT TEST

CATRA METALLURGICAL TEST

JD BUG CARE & INFORMATION

The JD BugTM has been designed and built to require very little adjustment or special care. To ensure long life and safe use, please refer to the following information.

1. Wheels. Always ensure the wheels are inspected before use for excessive wear. Wheels which are over-worn are dangerous and should be replaced immediately. We recommend that when replacing wheels that both wheels are replaced as this will increase the life of your new wheels.

2. Bearings. Always keep your bearings clean and free from dirt. This will increase their life. Do not allow your bearings to dry out naturally if they become wet, they should be wiped dry and re-greased immediately. This will increase the life of your bearings and ensure a smooth ride.

3. Axle Bolts. Always check axle bolts are secure before each use. They should always be free from dirt and obstructions between the axle and the wheels and bearings.

4. Other Parts. If any other part on your Bug becomes worn or damaged it should be replaced immediately. Bug parts and spares can be purchased from all good stockists.

The JD BugTM is constructed from Aircraft Grade T6 Aluminium for strength and fat free performance, weighing in at only 2.6Kg's.

Available in 5 colour options for wheels, grip tape, straps & handle grips.

Distributed In UK By:

J & R Sports Ltd, Unit 10A, Link Business Park, Ellis Ashton Street, Huyton, L36 6BP
Tel: +44 (0)151 480 6973
Fax: +44 (0)151 480 8191

FOLDING & UNFOLDING INSTRUCTIONS

JD BUG SCOOTER SPECIFICATION

A

B

Thank you for purchasing the JD BugTM Aluminium Scooter. This is the second generation scooter which features many improvements since the original release of this type of product.

Your Scooter features the following specification.

Single Action Folding / Unfolding System.

Original Fully Patented System.

Rear Wheel Guard / Spring Loaded Braking System.

Built In Shoulder Strap.

Multi Mount Clip for Carrying Your Accessories.

New Aluminium Matt Finish.

80S Grip Tape with JD Logo for Firm Footing.

100mm / 86A Semi Clear Wheels.

Abec 5 Chrome Bearings with Plate Shields Fully Sealed and Greased.

The JD Bug is available in 5 colour options for Wheels, Grip Tape, Straps and Handle Grips. These colours are Blue, Red, Orange, Green & Black.

You can customise your Bug by changing the wheels and handle grips with friends or purchasing new original parts.

1) Place one hand on stem and use your other hand to push down the lever to the side of the folding mechanism (A). Unfold stem into the vertical position until the mechanism locks (B). Always keep fingers away from folding area and mechanism.

Always keep fingers away from folding mechanism

2) Remove handle bars from the plastic multi mount clip (diagram C). Fit handle bar into position depressing ball lock and inserting handle bar into handle bar post until it clicks into position and ball lock can be seen (diagram D).

C

D

3) Diagram E indicates handle bars fitted correctly.

Raise stem to correct height required and close stem clamp (diagram F). To tighten fitting adjust clamp nut while in open position.

E

F

IMPORTANT INFORMATION

We recommend you read the following information before using your JD BugTM for the first time.

Please follow the assembly instructions carefully when folding and unfolding your JD BugTM.

The parts used in the construction of your Bug have been specifically designed and engineered to give performance and durability. We

recommend that you do not replace with non-original parts.

Before each use we recommend you check all axle bolts for tightness.

Do not use your Bug in poor weather and visibility conditions.

Ensure all parts are fully locked into position before use.

Avoid using your Bug near main roads or areas where the surface is

uneven.

We recommend the use of protective gear when riding the Bug, such as helmets, wrist guards and knee and elbow pads.

"STEP ON, BUG OUT & ENJOY!"

G

H

4) Rear Brake shown in diagram G. To use depress with sole or heal of foot so brake system slows rear wheel. Do not use to skid scooter. Diagram H indicates scooter position ready to ride. Note, Carry strap (not shown) should be removed during use.

If you experience difficulty with the folding / unfolding mechanism of your scooter please ask your retailer for their advice and assistance.